How to Locate a Broken Pipe and Fix Water Damage

Fixing a broken pipe can seem like a daunting task, but once you know what you’re doing, it should be a breeze. You just really need to know how to spot your leak, turn off the water, replace your piping, test your new system and then patch up all the damage that the water has already done. Here is how to locate a broken pipe and fix water damage.

Turn off the Water

If you have some kind of a water leak going on in your house, you’re going to want to put a stop to it as quickly as possible. You can do this by finding the valve that dispenses water to that location and close it immediately. If you can’t find that valve, then you’ll have to to do some research to find out where the lever that turns it off may be. Once you know where it is, be sure to turn if off right away. The sooner your turn the water source off, the better off you’ll be. This will prevent the leak from doing any further damage to your property.

Find the Source

Whenever you have a broken pipe, you can usually find the source of the leak pretty easily. If there’s a place where you’re noticing water dripping, just look up and make sure that it’s not as bad as it sounds. If the water is coming through a sheet of dry wall, then it’s a good sign that the leak has been running for some time. If this is the case, go ahead and cut through the dry wall that has inevitably gone soggy, and you will easily be able to find the broken pipe. If this is too difficult for you to find, you can always hire some kind of professional like Inline services to take a look at it for you, but it should be pretty easy to identify.

Repair any Damage

Once you’ve located the leak, removed the drywall and turned off the water source, it’s time to replace the broken pipe. You can either hire a plumber to take care of it for you, or you can replace it yourself. If you decide to replace it yourself, you will need to know exactly what caliber pipe to buy, and you will need to measure the length of the pipe so that you can have it cut to the right size by someone at your local hardware store. Once you’ve done this, it’s time to install your new pipe.

Test Your New Pipe

After you’ve replaced your broken pipe with a new one, it’s time to test it out to make sure that it is in working order. Go ahead and turn your water source back on and make sure that you don’t have any leaks. If you run the water and manage to get everything back in order without even a slow dripping leak, then you know that the job is complete. Just make sure that you test the new pipe multiple times with both hot and cold water. It can be difficult to know how tightly to install the pipe at first, but once you do your first test run, you will know exactly what you need to do.

Patch up Your Wall

Once you have successfully fixed your broken pipe, it’s time to patch up your wall or ceiling. Be sure that you know exactly what kind of drywall or sheet rock that you need to use, in addition to the specific type of paint that you need once you have patched everything up.

Related posts:

  1. Benefits of Filtered Water at Home
  2. Helpful Replacement Window Installation Tips
  3. 8 Checklist for Preparing House For Rent
  4. Non-Traditional Methods for Heating Your Swimming Pool
  5. Where to Start When Renovating an Older Home